- +86 189-6210-8169
- ocean@sheen.cc
- Jiacheng Building, 128 Zhongxin Avenue, Suzhou, Jiangsu, China
The XLS-2000 is our enclosed ride-on sweeper for wide outdoor routes where crews need more ground covered per pass and enough climbing power for difficult terrain.
It is built for airport runways, mining roads, and municipal routes. This machine is equipped with an enclosed cab, dual vacuum fans, and a maintenance-free battery that keeps it working through long outdoor shifts.
It keeps operators protected in harsh conditions and helps control heavy dust while the route keeps moving.
Heavy outdoor sweeping requires equipment that handles steep grades, airborne dust, and rough surfaces without frequent stops.
This commercial floor sweeper uses separate motors for travel, active water dust suppression, and an enclosed cab for outdoor operating routes.
The component details below explain how this machine clears a 2000mm path across harsh industrial and municipal routes.
Rough terrain, heavy dust, and bad weather force open equipment off the route. The XLS-2000 solves these site delays.
The advantages below detail how the enclosed cab, heavy mechanical components, and active dust suppression keep sweeping schedules moving forward day and night.
| Specification | Technical Data |
| Machine Type | Enclosed Ride-On Sweeper |
| Body Construction | Heavy-Duty Sheet Metal |
| Power System | 48V (6 x 8V 150Ah Batteries) |
| Motor Type | Brushed DC Motor |
| Operating Run Time | 6 to 8 Hours |
| Total Sweeping Path | 2000 mm |
| Max Productivity | 18,000 m²/h |
| Main Broom Length | 800 mm |
| Side Broom Diameter | 600 mm (4 Brooms) |
| Debris Hopper Capacity | 260 L |
| Dust Suppression Water Tank | 100 L |
| Max Gradeability | 35 degree |
| Traction Drive Motor | 1200W |
| Main Broom Motor | 1000W |
| Side Broom Motors | 4 x 100W |
| Vacuum Fan Motors | Dual 500W |
| Filter Shaker Motor | 100W |
| Filter Surface Area | 8 m² |
| Turning Radius | 1200 mm |
| Max Travel Speed | 20 km/h |
| Dimensions (L x W x H) | 2300 x 1950 x 2020 mm |
| Operating Weight (with batteries) | 950 kg |
| Standard Color | Green |
Airport Runways (Asphalt and Concrete)
Runway shoulders, service lanes, and apron edges pick up rubber, gravel, and loose metal. The XLS-2000 keeps these exposed airport routes clear through long outdoor sweeping runs.
Logistics Warehouse Yards (Concrete)
Freight keeps moving while the yard gets swept. The 2000mm path clears long concrete lanes and perimeter roads in one pass.
Mining Access Roads (Gravel and Compacted Dirt)
Mining roads are dry, rough, and rarely level. The XLS-2000 moves through loose ground and steep sections while cutting dust during the run.
Municipal Streets (Asphalt)
Municipal routes go flat to steep in one block. The 35-degree climbing keeps crews on the same route without breaking the job into sections.
Industrial Park Roadways (Asphalt and Concrete)
Roads between buildings collect dust, leaves, and debris all day. The XLS-2000 handles that with enclosed operation and wide coverage in one pass.
Cement Production Facilities (Concrete)
Cement dust spreads fast without control. With dual fans and water spray, it keep plant roads and loading areas clear during production.
The XLS-2000 is an industrial floor sweeping machine for routes with steep grades, heavy dust, and changing weather.
It delivers an enclosed sweeper that runs longer, protects operators, and eliminates the downtime cycle of exposed equipment.
For mixed indoor and outdoor routes that do not require an enclosed cab, compare the Tank5 ride-on floor sweeper.
Buying commercial cleaning equipment overseas means looking past the unit price.
Certificates, shipping crates, operator training, troubleshooting support, and spare parts all affect the real order cost.
We check the details from order confirmation to daily maintenance, before small problems turn into delays, downtime, or extra cost.
Different markets ask for specific certificates, manuals, and customs paperwork. We check the available certificates and export documents for your selected model.
This helps you see whether the machine is ready for your market early. It reduces back-and-forth communication and helps reduce customs delays caused by missing paperwork.
Local markets require local setups. We configure the right voltage and plug type for every machine, even single sample orders.
For bulk buyers, we also adjust brand colors and logos. This ensures your machines look and function exactly as expected on arrival.
Heavy cleaning machines go through rough handling during ocean freight, warehouse transfers, and repeated loading.
We select packing methods based on machine size, weight, and transit type. This cuts the risk of scratches, deformation, loose parts, and outer-box damage.
After delivery, cleaning crews need to operate the machine correctly from the first shift. We provide standard operation and maintenance materials.
These files help crews learn the basic operating steps faster. This helps reduce repeated training work and prevents hardware damage caused by incorrect use.
Once a machine is down, the cleaning route slows down fast. When you submit a service issue, our technical team replies quickly during business hours.
We provide an initial diagnosis and remote guidance to help identify the cause sooner.
Long-term use depends on reliable warranty policies and steady part replacements. We support common wear parts, core components, and replacement needs by machine type.
You can plan spare parts inventory ahead of time. This avoids leaving a machine idle over a small missing part.
Floor size and industry environments dictate your equipment choice. We manufacture these related scrubbers with different hardware configurations.
Review their technical data to find the right machine for your specific sector.
Floor sweeper selection starts with debris type, route width, dust level, and dumping access. Operating conditions matter.
These FAQs also cover power setup, wear parts, branding, documents, package contents, and warranty terms.
Match the machine to the route, not just the floor area. Manual walk-behind sweepers suit smaller hard-surface areas, tight aisles, and close-control zones. Powered or enclosed ride-on sweepers fit longer, wider, or more exposed routes.
Send photos, route width, surface, debris, slope, dust level, dumping point, and charging access for powered models.
This machine type is mainly for loose dry debris. Dust, sand, leaves, paper scraps, carton pieces, pallet chips, shrink-wrap pieces, gravel, and small loose debris may fit when the brush and hopper match the job.
Fine dust is not pallet chips. Sticky residue, gum, oil film, wet sludge, and tire marks need another method.
Match the use area to the sweeper type and route condition. A compact hard-surface route may suit a manual walk-behind machine.
Yards, open lanes, and longer outdoor routes may call for powered or enclosed ride-on sweepers.
Parking areas need a closer look because dry debris often sits near water, oil, or tire marks. Sweep loose debris first. Handle those floor problems separately.
Compare the numbers that change daily operation. Sweeping path affects passes. Hopper capacity affects dump stops. Turning radius decides whether the machine fits gates, corners, and aisles.
Also look at main brush size, side brush setup, filter area, dust-control method, power source, runtime if provided, machine size, weight, and gradeability.
Use the latest specification sheet when finalizing model details.
Sweeping width is about passes. Hopper capacity is about dump stops. Dust-control parts need more care in the wording because they are not shared across all models.
Filter type, misting, fan use, and filter shaking only apply when the selected machine includes them. Dry fine dust, outdoor wind, and daily filter maintenance can change how the sweeper feels in use.
The usual wear area is the sweeping system. Side brushes, the main brush, rubber flaps or skirts, filters, sealing strips, wheels, and dust-control parts may need replacement over time.
Rough concrete, sharp scrap, long routes, and dusty work can shorten the replacement rhythm. Before purchase, ask for part codes, quantities, and suggested first-order consumables for the exact model.
Manual walk-behind sweepers do not need charging. No charger voltage or plug type check is needed for that type.
Powered ride-on and enclosed ride-on machines are different. For those, review the battery version, charger version, input voltage, plug type, and local electrical requirements for the destination country.
Yes, these requests can be discussed. Logo, body color, packaging, and document changes are tied to the selected model, order quantity, production partner, cost, and lead time.
Share the model, expected quantity, logo file, destination market, and sales channel during order discussion.
Warranty, remote support, and package contents follow the exact model and order terms. Review the warranty period, covered parts, excluded parts, claim steps, and available remote guidance.
Also check what ships with the machine: battery and charger where applicable, brushes, filters, optional add-ons, documents, and first-order consumables.
Share the debris type, route width, surface, and daily sweeping area. We can compare manual walk-behind, powered ride-on, and enclosed ride-on options.
Ask about dust-control parts, order quantities, branding, documents, spare parts, or shipping details.
Jiacheng Building, 128 Zhongxin Avenue, Suzhou, Jiangsu, China
+86 189-6210-8169
ocean@sheen.cc
Tell us what you are looking for. We’ll help you compare suitable options.
