- +86 189-6210-8169
- ocean@sheen.cc
- Jiacheng Building, 128 Zhongxin Avenue, Suzhou, Jiangsu, China
The N3 Plus is a self-propelled walk-behind floor scrubber for large commercial floors, allowing one operator to cover more floors without the physical strain of pushing for a full shift.
In ECO mode, it runs at 66dB, so cleaning keeps going around patients, students, and shoppers without the machine becoming a noise problem.
The self-propelled drive and durable tank build make it a strong fit for warehouse lanes, retail aisles, hospitals, and other large daily cleaning routes.
Large commercial cleaning routes demand equipment that resists physical wear and simplifies operator control.
The N3 Plus addresses these specific requirements through targeted structural upgrades.
Review the hardware components below to see how the pickled metal frame, digital touch interface, and quiet ECO mode handle heavy daily use across various facilities.
Large commercial floors drain operator energy and expose equipment to constant wear. This self-propelled walk-behind floor scrubber shifts more of the physical workload to the machine through powered travel and centralized digital controls.
Review the daily advantages below to see how this scrubber maintains a fast, quiet, and consistent cleaning pace across occupied facilities.
| Specification | Technical Data |
| Body Construction | 9mm Rotomolded LLDPE & Pickled Metal Frame |
| Brush Motor | 550W |
| Vacuum Motor | 500W |
| Drive Motor | 300W (Self-Propelled) |
| Cleaning Path | 500 mm |
| Squeegee Width | 800 mm |
| Pad/Brush Size | 18 inches |
| Max Productivity | 2,250 m²/h |
| Solution Tank Capacity | 45 L |
| Recovery Tank Capacity | 50 L |
| Battery System | 24V 100Ah (Lead-acid) |
| Charger Type | 24V 15A (External) |
| Max Run Time | Up to 3 hours |
| Charging Time | 7-8 hours |
Factory Workshops (Epoxy Floors)
Light workshop epoxy floors pick up dust, tyre marks, and light oil through the shift. The self-propelled N3 Plus keeps long lanes moving and clears that daily build-up without scuffing the coating.
Warehouses & Logistics Centers (Concrete Floors)
Long concrete lanes eat time fast. With self-propelled drive and 2,250 m²/h output, the N3 Plus keeps big warehouse routes moving.
Shopping Malls & Supermarkets (Tile & Terrazzo)
Open aisles leave no room for wet floors. The N3 Plus picks up water fast, so tile and terrazzo dry sooner during trading hours.
Parking Lots & Garages (Concrete Floors)
Garage lanes pick up grit, tyre marks, and oil every day. The self-propelled N3 Plus keeps those concrete routes moving and clears the buildup without slowing them down.
Hotels & Property Management (Hardened & Tile Floors)
Hallways, lobbies, and shared areas need to stay presentable through repeated daily cleaning. The self-propelled drive helps teams keep long interior routes moving.
Hospitals & Schools (PVC, Vinyl & Smooth Floors)
Occupied buildings need quieter cleaning during the day. The ECO mode drops noise to 66 dB, so staff can clean without disturbing patients or classes.
Facility managers do not have time for a scrubber that slows the route, wears staff down, or ends up off the floor for repairs.
They need one machine that can cover large floor areas, stay quieter when the site is occupied, and withstand daily impact without becoming a maintenance issue. That’s what we built the N3 Plus for.
For sites that do not need self-propelled travel, compare the N3 walk-behind floor scrubber.
Buying commercial cleaning equipment overseas means looking past the unit price.
Certificates, shipping crates, operator training, troubleshooting support, and spare parts all affect the real order cost.
We check the details from order confirmation to daily maintenance, before small problems turn into delays, downtime, or extra cost.
Different markets ask for specific certificates, manuals, and customs paperwork. We check the available certificates and export documents for your selected model.
This helps you see whether the machine is ready for your market early. It reduces back-and-forth communication and helps reduce customs delays caused by missing paperwork.
Local markets require local setups. We configure the right voltage and plug type for every machine, even single sample orders.
For bulk buyers, we also adjust brand colors and logos. This ensures your machines look and function exactly as expected on arrival.
Heavy cleaning machines go through rough handling during ocean freight, warehouse transfers, and repeated loading.
We select packing methods based on machine size, weight, and transit type. This cuts the risk of scratches, deformation, loose parts, and outer-box damage.
After delivery, cleaning crews need to operate the machine correctly from the first shift. We provide standard operation and maintenance materials.
These files help crews learn the basic operating steps faster. This helps reduce repeated training work and prevents hardware damage caused by incorrect use.
Once a machine is down, the cleaning route slows down fast. When you submit a service issue, our technical team replies quickly during business hours.
We provide an initial diagnosis and remote guidance to help identify the cause sooner.
Long-term use depends on reliable warranty policies and steady part replacements. We support common wear parts, core components, and replacement needs by machine type.
You can plan spare parts inventory ahead of time. This avoids leaving a machine idle over a small missing part.
Floor size and industry environments dictate your equipment choice. We manufacture these related scrubbers with different hardware configurations.
Review their technical data to find the right machine for your specific sector.
Floor scrubbers differ in cleaning path, tank size, power setup, and floor compatibility. One setup does not fit every site. These FAQs also cover wear parts, branding, documents, package contents, and order terms.
Focus on specs that change the route: cleaning path, squeegee width, tank size, runtime, charge time, dimensions, weight, and gradeability if ramps are involved.
A wider path helps open floors. Tanks affect refill and dump stops. Runtime only matters after you map the cleaning window.
Plan first for disc brushes and squeegee rubber blades. Pads, pad drivers, filters, hoses, debris baskets, batteries, and chargers vary by model.
Ask for the quoted model’s part list and first-order add-ons instead of assuming one package fits every order.
Residue decides the answer. Light daily dirt and heavy oily buildup are not the same job. Oil, tire marks, sticky residue, and old stains should be matched to the floor material, chemical plan, brush or pad choice, and operator route.
Heavy loose debris, thick residue, adhesive spots, or deep tire marks may need pre-sweeping, pre-treatment, or a different scrubber model.
For selected models, hard-floor use may include concrete, epoxy, tile, PVC, vinyl, terrazzo, marble, or similar surfaces. Final fit is still model-specific.
Coating condition, residue type, water flow, brush or pad choice, and floor-care rules all matter. Share the floor type and coating condition so the setup can be matched before order discussion.
One sample unit can be discussed, but it is not a blanket rule for every buyer or model.
The decision depends on buyer profile, selected model, freight method, payment terms, and repeat-order plan.
Yes, but it needs an order check. Product specs may list battery system, charger type, runtime, and charge time. Country input voltage, plug type, and local charging conditions are separate.
Send the destination country and planned charging environment so the charger version can be matched to the quoted model.
Logo, body color, packaging, and document changes are handled by model and order quantity.
We can discuss OEM and ODM needs such as branding, appearance, packaging, documentation, and configuration for suitable orders.
Some applicable models may require an MOQ for body color changes. Logo requirements may have a separate MOQ.
Document coverage should be checked by model and destination. CE and ETL documentation may be available where required, but the paperwork needs to match the exact model.
Importers, distributors, and tender buyers should share the destination country, sales channel, and required document list with the inquiry.
We can then check the document package against those requirements.
Manuals and video guidance may be available by model and order terms. The scope may cover installation, disassembly, operation, or basic maintenance.
Video text translation can also be discussed. Send the materials you need, and we can check what is available for the quoted model.
Warranty and remote help follow the model and order terms. Remote guidance can be discussed for installation and repair questions.
Some quoted models may include machine-body warranty or core-component replacement support.
The period, covered parts, exclusions, claim steps, and order agreement still need confirmation before purchase.
Package contents need a model check. Product specs may list battery systems, charger types, brush or pad sizes, and squeegee widths, but the default shipment package should be confirmed separately.
Some buyers may need extra brushes, pads, pad drivers, squeegee blades, batteries, chargers, tools, or consumables for the first order.
We can list included items and optional add-ons for the quoted package.
Share your floor type, cleaning area, and daily route. We can compare suitable walk-behind and ride-on options for your inquiry.
Ask about order quantities, branding, documents, spare parts, or shipping details.
Jiacheng Building, 128 Zhongxin Avenue, Suzhou, Jiangsu, China
+86 189-6210-8169
ocean@sheen.cc
Tell us what you are looking for. We’ll help you compare suitable options.
