- +86 189-6210-8169
- ocean@sheen.cc
- Jiacheng Building, 128 Zhongxin Avenue, Suzhou, Jiangsu, China
The N3 is an entry-level commercial walk-behind floor scrubber built for buyers who need daily cleaning without paying for more machine than the site needs.
Its 9mm rotomolded body and sheet metal frame take the daily impacts of warehouses, malls, and factory floors without structural damage.
Buyers can keep the upfront cost lower with the standard vacuum motor or choose the optional AMETEK unit for heavier cleaning demands.
Entry-level machines often break down under daily commercial use. The N3 targets this physical wear directly with a thick shell, a sheet metal base, and simplified mechanical controls.
Review the specific hardware components below to see how this machine handles rough warehouse and retail routes.
High turnover and rough daily routes break down fragile entry-level equipment. The N3 targets these exact physical and management problems directly.
Review the daily benefits below to see how this scrubber keeps service costs low and floor care simple.
If the route requires powered travel, compare the N3 Plus self-propelled floor scrubber.
| Specification | Details |
| Body Construction | 9mm Rotomolded LLDPE & Sheet Metal Base |
| Brush Motor | 380W |
| Vacuum Motor | 500W (Standard) / Optional AMETEK |
| Cleaning Path | 500 mm |
| Squeegee Width | 800 mm |
| Pad/Brush Size | 18 inches |
| Max Productivity | 2,250 m²/h |
| Solution Tank Capacity | 45 L |
| Recovery Tank Capacity | 50 L |
| Battery System | 12V 100Ah x 2 (Lead-acid) |
| Charger Type | 24V 15A (External) |
| Max Run Time | Up to 3 hours |
| Charging Time | 7-8 hours |
Factory Workshops (Epoxy Floors)
Epoxy workshop floors pick up light oil film, dust, and foot traffic dirt around workstations and walkways. The N3 handles that routine buildup without damaging the epoxy coating or taking staff back to manual cleanup.
Warehouses & Logistics Centers (Concrete Floors)
Large concrete floors burn time when crews keep stopping to refill. At 2,250 m²/h, with large tanks and dual batteries, the N3 keeps more of the route moving before the next stop.
Shopping Malls & Supermarkets (Tile & Terrazzo)
Retail aisles do not stay empty for long. The 800mm squeegee pulls water off tile and terrazzo fast, so staff can reopen the area before the next customer rush.
Parking Lots and Garages (Concrete Floors)
Concrete garage floors collect tracked-in grit, surface dirt, and light oil from daily vehicle and foot traffic. The N3 scrubs through that routine buildup and keeps the floor clean without bringing in a heavier machine for an ordinary garage route.
Hotels & Property Management (Hardened & Tile Floors)
Hotel corridors and lobby routes often pass through different staff hands. Two simple switches keep operation straightforward, so new cleaners can get hardened floors and tile areas cleaned right from the start.
Hospitals & Commercial Offices (PVC & Vinyl Floors)
PVC and vinyl floors need fast drying between shifts and foot traffic. The 500W vacuum motor pulls surface water off quickly, so floors are dry and ready before the next person walks through.
Sites do not need a scrubber that looks bigger and costs more than the floor really needs. They need one that can take daily dirt, wall contact, and regular staff use while keeping maintenance costs low.
The N3 is a straightforward walk-behind floor scrubber with a 9mm body, sheet metal frame, simple controls, and a price point for routine commercial cleaning budgets.
Buying commercial cleaning equipment overseas means looking past the unit price.
Certificates, shipping crates, operator training, troubleshooting support, and spare parts all affect the real order cost.
We check the details from order confirmation to daily maintenance, before small problems turn into delays, downtime, or extra cost.
Different markets ask for specific certificates, manuals, and customs paperwork. We check the available certificates and export documents for your selected model.
This helps you see whether the machine is ready for your market early. It reduces back-and-forth communication and helps reduce customs delays caused by missing paperwork.
Local markets require local setups. We configure the right voltage and plug type for every machine, even single sample orders.
For bulk buyers, we also adjust brand colors and logos. This ensures your machines look and function exactly as expected on arrival.
Heavy cleaning machines go through rough handling during ocean freight, warehouse transfers, and repeated loading.
We select packing methods based on machine size, weight, and transit type. This cuts the risk of scratches, deformation, loose parts, and outer-box damage.
After delivery, cleaning crews need to operate the machine correctly from the first shift. We provide standard operation and maintenance materials.
These files help crews learn the basic operating steps faster. This helps reduce repeated training work and prevents hardware damage caused by incorrect use.
Once a machine is down, the cleaning route slows down fast. When you submit a service issue, our technical team replies quickly during business hours.
We provide an initial diagnosis and remote guidance to help identify the cause sooner.
Long-term use depends on reliable warranty policies and steady part replacements. We support common wear parts, core components, and replacement needs by machine type.
You can plan spare parts inventory ahead of time. This avoids leaving a machine idle over a small missing part.
Floor size and industry environments dictate your equipment choice. We manufacture these related scrubbers with different hardware configurations.
Review their technical data to find the right machine for your specific sector.
Floor scrubbers differ in cleaning path, tank size, power setup, and floor compatibility. One setup does not fit every site. These FAQs also cover wear parts, branding, documents, package contents, and order terms.
Focus on specs that change the route: cleaning path, squeegee width, tank size, runtime, charge time, dimensions, weight, and gradeability if ramps are involved.
A wider path helps open floors. Tanks affect refill and dump stops. Runtime only matters after you map the cleaning window.
Plan first for disc brushes and squeegee rubber blades. Pads, pad drivers, filters, hoses, debris baskets, batteries, and chargers vary by model.
Ask for the quoted model’s part list and first-order add-ons instead of assuming one package fits every order.
Residue decides the answer. Light daily dirt and heavy oily buildup are not the same job. Oil, tire marks, sticky residue, and old stains should be matched to the floor material, chemical plan, brush or pad choice, and operator route.
Heavy loose debris, thick residue, adhesive spots, or deep tire marks may need pre-sweeping, pre-treatment, or a different scrubber model.
For selected models, hard-floor use may include concrete, epoxy, tile, PVC, vinyl, terrazzo, marble, or similar surfaces. Final fit is still model-specific.
Coating condition, residue type, water flow, brush or pad choice, and floor-care rules all matter. Share the floor type and coating condition so the setup can be matched before order discussion.
One sample unit can be discussed, but it is not a blanket rule for every buyer or model.
The decision depends on buyer profile, selected model, freight method, payment terms, and repeat-order plan.
Yes, but it needs an order check. Product specs may list battery system, charger type, runtime, and charge time. Country input voltage, plug type, and local charging conditions are separate.
Send the destination country and planned charging environment so the charger version can be matched to the quoted model.
Logo, body color, packaging, and document changes are handled by model and order quantity.
We can discuss OEM and ODM needs such as branding, appearance, packaging, documentation, and configuration for suitable orders.
Some applicable models may require an MOQ for body color changes. Logo requirements may have a separate MOQ.
Document coverage should be checked by model and destination. CE and ETL documentation may be available where required, but the paperwork needs to match the exact model.
Importers, distributors, and tender buyers should share the destination country, sales channel, and required document list with the inquiry.
We can then check the document package against those requirements.
Manuals and video guidance may be available by model and order terms. The scope may cover installation, disassembly, operation, or basic maintenance.
Video text translation can also be discussed. Send the materials you need, and we can check what is available for the quoted model.
Warranty and remote help follow the model and order terms. Remote guidance can be discussed for installation and repair questions.
Some quoted models may include machine-body warranty or core-component replacement support.
The period, covered parts, exclusions, claim steps, and order agreement still need confirmation before purchase.
Package contents need a model check. Product specs may list battery systems, charger types, brush or pad sizes, and squeegee widths, but the default shipment package should be confirmed separately.
Some buyers may need extra brushes, pads, pad drivers, squeegee blades, batteries, chargers, tools, or consumables for the first order.
We can list included items and optional add-ons for the quoted package.
Share your floor type, cleaning area, and daily route. We can compare suitable walk-behind and ride-on options for your inquiry.
Ask about order quantities, branding, documents, spare parts, or shipping details.
Jiacheng Building, 128 Zhongxin Avenue, Suzhou, Jiangsu, China
+86 189-6210-8169
ocean@sheen.cc
Tell us what you are looking for. We’ll help you compare suitable options.
