- +86 189-6210-8169
- ocean@sheen.cc
- Jiacheng Building, 128 Zhongxin Avenue, Suzhou, Jiangsu, China
Clean office buildings, supermarkets, and hospitals with the MN-V51. At 61cm wide, it fits standard passenger elevators and narrow corridors.
The dual-motor system delivers the scrubbing power and water recovery needed for heavy daily dirt and fast turnaround.
Built for contractors and facility teams that need one machine to cover more of the building without slowing the route down.
Every component on the MN-V51 targets faster cleaning cycles and less operator fatigue. High-capacity tanks reduce downtime, while independent motors deliver consistent scrubbing power across the entire facility.
Review the specific hardware choices that help your cleaning staff stay on schedule without unnecessary interruptions. Buyers comparing another walk-behind layout can review the XD20WE floor scrubber dryer.
Contractors lose money when crews wait around. You need machines that fit the actual building.
The MN-V51 limits expensive downtime. Your staff will spend less physical energy pushing equipment. This directly cuts your daily labor expenses.
| Specification | Technical Data |
| Main Material | Rotomolded LLDPE |
| Motor Type | Brushed DC Motor |
| Control Panel Options | Mechanical Switch / Touch Panel |
| Battery Charger | 24V 15A |
| Battery Capacity | 24V 125Ah (100Ah Lead-Acid Optional) |
| Brush Motor Power | 550 W |
| Vacuum Motor Power | 450 W |
| Cleaning Path | 500 mm |
| Squeegee Width | 800 mm |
| Max Run Time | Up to 4.5 hours |
| Charge Time | Approx. 8 hours |
| Solution Tank Capacity | 60 L |
| Recovery Tank Capacity | 65 L |
| Max Productivity | 2,400 ㎡/h |
| Scrub Brush Size | 480 mm |
| Machine Dimensions (L x W x H) | 1350 x 610 x 1080 mm |
| Operating Weight (with batteries) | 130 kg |
| Standard Colors | Gray |
Shopping Malls and Supermarkets, Ceramic Tile
Fast-drying recovery helps reopen aisles quickly between trading periods with less disruption to customer traffic.
Office Buildings, PVC and Vinyl
The elevator-ready frame lets one operator clean every floor in a single shift without staging equipment between levels or waiting on freight elevator availability.
Navigates tight racking aisles and removes oil residue from epoxy surfaces without damaging the coating or slowing the operator down.
Restaurants and Hotels, Terrazzo and Wet Areas
Floors dry immediately after each pass, so guest-facing areas stay safe and presentable throughout service without a waiting period that interrupts flow.
With a strong scrubbing force, it handles heavy dust and oil across rougher floors without slowing the cleaning route.
Schools and Hospitals, Smooth Commercial Areas
Fast turnaround and simple operation help rotating staff keep shared spaces clean and ready for use.
Cleaning contractors and facility teams deal with different kinds of buildings, different floor conditions, and schedules that don’t leave much room for delay.
They need one machine that can move across those jobs without slowing the route down or forcing a different setup at every site. The MN-V51 is a compact walk-behind floor scrubber for this type of multi-site workload.
Buying commercial cleaning equipment overseas means looking past the unit price.
Certificates, shipping crates, operator training, troubleshooting support, and spare parts all affect the real order cost.
We check the details from order confirmation to daily maintenance, before small problems turn into delays, downtime, or extra cost.
Different markets ask for specific certificates, manuals, and customs paperwork. We check the available certificates and export documents for your selected model.
This helps you see whether the machine is ready for your market early. It reduces back-and-forth communication and helps reduce customs delays caused by missing paperwork.
Local markets require local setups. We configure the right voltage and plug type for every machine, even single sample orders.
For bulk buyers, we also adjust brand colors and logos. This ensures your machines look and function exactly as expected on arrival.
Heavy cleaning machines go through rough handling during ocean freight, warehouse transfers, and repeated loading.
We select packing methods based on machine size, weight, and transit type. This cuts the risk of scratches, deformation, loose parts, and outer-box damage.
After delivery, cleaning crews need to operate the machine correctly from the first shift. We provide standard operation and maintenance materials.
These files help crews learn the basic operating steps faster. This helps reduce repeated training work and prevents hardware damage caused by incorrect use.
Once a machine is down, the cleaning route slows down fast. When you submit a service issue, our technical team replies quickly during business hours.
We provide an initial diagnosis and remote guidance to help identify the cause sooner.
Long-term use depends on reliable warranty policies and steady part replacements. We support common wear parts, core components, and replacement needs by machine type.
You can plan spare parts inventory ahead of time. This avoids leaving a machine idle over a small missing part.
Worn parts require fast swaps. Operators change rubber blades and filters right on the floor. The process takes under one minute. You stop paying for expensive technician visits. The equipment goes back to cleaning corridors immediately. This directly cuts your daily maintenance expenses.
Floor size and industry environments dictate your equipment choice. We manufacture these related scrubbers with different hardware configurations.
Review their technical data to find the right machine for your specific sector.
Floor scrubbers differ in cleaning path, tank size, power setup, and floor compatibility. One setup does not fit every site. These FAQs also cover wear parts, branding, documents, package contents, and order terms.
Focus on specs that change the route: cleaning path, squeegee width, tank size, runtime, charge time, dimensions, weight, and gradeability if ramps are involved.
A wider path helps open floors. Tanks affect refill and dump stops. Runtime only matters after you map the cleaning window.
Plan first for disc brushes and squeegee rubber blades. Pads, pad drivers, filters, hoses, debris baskets, batteries, and chargers vary by model.
Ask for the quoted model’s part list and first-order add-ons instead of assuming one package fits every order.
Residue decides the answer. Light daily dirt and heavy oily buildup are not the same job. Oil, tire marks, sticky residue, and old stains should be matched to the floor material, chemical plan, brush or pad choice, and operator route.
Heavy loose debris, thick residue, adhesive spots, or deep tire marks may need pre-sweeping, pre-treatment, or a different scrubber model.
For selected models, hard-floor use may include concrete, epoxy, tile, PVC, vinyl, terrazzo, marble, or similar surfaces. Final fit is still model-specific.
Coating condition, residue type, water flow, brush or pad choice, and floor-care rules all matter. Share the floor type and coating condition so the setup can be matched before order discussion.
One sample unit can be discussed, but it is not a blanket rule for every buyer or model.
The decision depends on buyer profile, selected model, freight method, payment terms, and repeat-order plan.
Yes, but it needs an order check. Product specs may list battery system, charger type, runtime, and charge time. Country input voltage, plug type, and local charging conditions are separate.
Send the destination country and planned charging environment so the charger version can be matched to the quoted model.
Logo, body color, packaging, and document changes are handled by model and order quantity.
We can discuss OEM and ODM needs such as branding, appearance, packaging, documentation, and configuration for suitable orders.
Some applicable models may require an MOQ for body color changes. Logo requirements may have a separate MOQ.
Document coverage should be checked by model and destination. CE and ETL documentation may be available where required, but the paperwork needs to match the exact model.
Importers, distributors, and tender buyers should share the destination country, sales channel, and required document list with the inquiry.
We can then check the document package against those requirements.
Manuals and video guidance may be available by model and order terms. The scope may cover installation, disassembly, operation, or basic maintenance.
Video text translation can also be discussed. Send the materials you need, and we can check what is available for the quoted model.
Warranty and remote help follow the model and order terms. Remote guidance can be discussed for installation and repair questions.
Some quoted models may include machine-body warranty or core-component replacement support.
The period, covered parts, exclusions, claim steps, and order agreement still need confirmation before purchase.
Package contents need a model check. Product specs may list battery systems, charger types, brush or pad sizes, and squeegee widths, but the default shipment package should be confirmed separately.
Some buyers may need extra brushes, pads, pad drivers, squeegee blades, batteries, chargers, tools, or consumables for the first order.
We can list included items and optional add-ons for the quoted package.
Share your floor type, cleaning area, and daily route. We can compare suitable walk-behind and ride-on options for your inquiry.
Ask about order quantities, branding, documents, spare parts, or shipping details.
Jiacheng Building, 128 Zhongxin Avenue, Suzhou, Jiangsu, China
+86 189-6210-8169
ocean@sheen.cc
Tell us what you are looking for. We’ll help you compare suitable options.
